|
|
|
High Leverage Diagonal Cutter Angled Head - JIC-2488
Crafted with an angled head for heavy-duty wire cutting in confined spaces, and made of specially forged alloy steel for strength and cutting ability. Red plastic handle 8" long.
High Leverage Diagonal Cutter Angled Head - JIC-2488 »
|
|
Telecom Diagonal - JIC-7858
Tapered nose diagonal cutting pliers with standardbevel
knives with .030" and .045" skinning holes, with crusher used for multi-purpose wire work, with two V-shaped stripping notches.
Telecom Diagonal - JIC-7858 »
|
|
Diagonal Pliers - Skinning & Stripping - DIAGB6
Tapered nose diagonal cutting pliers with standardbevel
knives with one .045" skinning hole, crusher
used for multipurpose wire work, and two V shaped
stripping notches.
Diagonal Pliers - Skinning & Stripping - DIAGB6 »
|
|
Flush Cut Pliers - JIC-453
A close cutting plier used to trim conductors from the 710
connector modules without leaving exposed conductors.
Flush Cut Pliers - JIC-453 »
|
|
Telecom Long Nose Pliers - JIC-21257
Long nose have side cutting blades, a crushing slot,
one .030" stripping hole, and a thin knurled nose to
facilitate handling of the wire at the central office terminals.
Telecom Long Nose Pliers - JIC-21257 »
|
|
Combo Crimper Long Nose Pliers - JIC-22148
Five tools in one, combines crimper for UR/UY/UG, AMP tel splice connectors, 709 series connectors, crimping "B" type connectors and a long
nose pliers.
Combo Crimper Long Nose Pliers - JIC-22148 »
|
|
Curved Needle Nose Plier - JIC-3385
Nose is bent 60° for maximum visibility. Used in confined areas for bending and forming fine wire. Inside jaws and jaw edges are polished to prevent nicking the wire.
Curved Needle Nose Plier - JIC-3385 »
|
|
Curved Long Nose Plier - JIC-3026
Nose is bent 70° for maximum visibility. Used in confined areas. Design includes knurled jaws for sure wrapping and looping.
Curved Long Nose Plier - JIC-3026 »
|
|
|
High Leverage Diagonal Cutter Angled Head - JIC-2488
Crafted with an angled head for heavy-duty wire cutting in confined spaces, and made of specially forged alloy steel for strength and cutting ability. Red plastic handle 8" long.
High Leverage Diagonal Cutter Angled Head - JIC-2488 »
|
|
|
Combo Crimper Long Nose Pliers - JIC-22148
Five tools in one, combines crimper for UR/UY/UG, AMP tel splice connectors, 709 series connectors, crimping "B" type connectors and a long
nose pliers.
Combo Crimper Long Nose Pliers - JIC-22148 »
|
|
Pump Pliers - 6 inches
Manufactured with a secure tongue and groove design for a non-slip grip (even under heavy pressure).
Pump Pliers - 6 inches »
|
|
Pump Pliers - 10 inches
Manufactured with a secure tongue and groove design for a non-slip grip (even under heavy pressure).
Pump Pliers - 10 inches »
|
|
Pump Pliers - 12 inches
Manufactured with a secure tongue and groove design for a non-slip grip (even under heavy pressure).
Pump Pliers - 12 inches »
|
|
Heat Coil Pliers - PLS-5
Designed for installing and extracting heat coils,
fuses and other cylindrical shaped components.
Heat Coil Pliers - PLS-5 »
|
|
|
Curved Needle Nose Plier - JIC-3385
Nose is bent 60° for maximum visibility. Used in confined areas for bending and forming fine wire. Inside jaws and jaw edges are polished to prevent nicking the wire.
Curved Needle Nose Plier - JIC-3385 »
|
|
|
Curved Long Nose Plier - JIC-3026
Nose is bent 70° for maximum visibility. Used in confined areas. Design includes knurled jaws for sure wrapping and looping.
Curved Long Nose Plier - JIC-3026 »
|
|
|
Curved Needle Nose Plier - JIC-3385
Nose is bent 60° for maximum visibility. Used in confined areas for bending and forming fine wire. Inside jaws and jaw edges are polished to prevent nicking the wire.
Curved Needle Nose Plier - JIC-3385 »
|
|
|
Curved Long Nose Plier - JIC-3026
Nose is bent 70° for maximum visibility. Used in confined areas. Design includes knurled jaws for sure wrapping and looping.
Curved Long Nose Plier - JIC-3026 »
|
|
